- Made in North Devon since 1973
- BSI Kitemark ready-mixed concrete
- Manufactured to applicable British Standards
- UK-wide & European delivery
Agricultural · slurry
Slurry Storage.
SSAFO 2018-ready. Six-month capacity.
Precast slurry walls are SSAFO 2018-compliant, 95mm to 180mm thick (4in to 7in) at heights of 1.0m to 1.5m (3'3" to 4'11"), designed to Eurocode 2, with sulphate-resisting C40 up to C60 concrete.
WCCP precast slurry store walls are 95 mm, 145 mm or 180 mm (4in, 6in or 7in) thick, with the 180 mm panel able to stand in cantilever without posts, to the retained height your engineer specifies. Walls must be impermeable (k ≤ 1×10⁻⁹ m/s).
SSAFO 2018-compliant precast slurry storage. WCCP prestressed panels at 95mm, 145mm or 180mm (4in, 6in or 7in) thick at heights of 1.0m, 1.2m and 1.5m (3'3", 3'11" and 4'11"), with custom or 15' and 20' standard lengths. The 180mm Vertical Cantilever Panels can stand without supporting posts, to the retained height your engineer specifies. Mix matched to the exposure on the drawing.
- · SSAFO 2018 compliant
- · 6-month capacity
- · 95 / 145 / 180mm thick (4/6/7in)
- · 1.0 / 1.2 / 1.5m high (3'3"/3'11"/4'11")
- · Cantilever, no posts
- · No supporting posts
Prestressed Panels
Three thicknesses, three heights.
95mm, 145mm or 180mm thick (4in, 6in or 7in) at 1.0m, 1.2m and 1.5m heights (3'3", 3'11" and 4'11"). Custom lengths to order, plus 15' and 20' standard lengths.
| Thickness | Heights available | Lengths | Typical use |
|---|---|---|---|
| 95mm (4in) | 1.0m (3ft3in), 1.2m (3ft11in), 1.5m (4ft11in) | Custom + 15' & 20' standard | Bund walls, transition panels, lower-load applications |
| 145mm (6in) | 1.0m (3ft3in), 1.2m (3ft11in), 1.5m (4ft11in) | Custom + 15' & 20' standard | Mid-size stores; cantilever heights reduced 0.3–0.4m (1ft–1ft4in) vs 180mm |
| 180mm (7in) | 1.0m (3ft3in), 1.2m (3ft11in), 1.5m (4ft11in) | Custom + 15' & 20' standard | Slurry stores; vertical cantilever, retained height by your engineer slurry retained |
Capacity statement for the units supplied, issued with the order pack. Structural design of the store is by your engineer.
Vertical Cantilever Panels
No supporting posts required.
The 180mm panels retain to the heights below in cantilever — no supporting posts in the wall run. 145mm panels can be used in cantilever with retained heights reduced by 0.3–0.4m (1ft–1ft4in).
| Service | Retained height (180mm) | Notes |
|---|---|---|
| Slurry retention | To your engineer's design | Tell us the retained depth and panel thickness specified |
| Silage with vehicle surcharge | To your engineer's design | Surcharge from the vehicles that will run against it |
| Earth retention | To your engineer's design | Retained height and surcharge from the section drawing |
Where they go
Common applications.
From a small dairy adding 300m³ (10,590 cu ft) of capacity to an AD-feed store — same panels, same paperwork, same yard.
- · New SSAFO 2018-compliant slurry stores for dairy units
- · Above-ground rectangular and circular tank walls
- · Reception pits and pre-store buffer tanks
- · Slurry separation and lagoon containment walls
- · Anaerobic digester feed pits and storage
- · Beef and pig housing under-slat slurry channels
Standards & certification
SSAFO-compliant, factory-controlled.
- SSAFO 2018
- Silage, Slurry and Agricultural Fuel Oil regs. Capacity statement supplied.
- British Standards
- Our products are manufactured in compliance with applicable British Standards. For information regarding the specific standards applicable to a particular product, please contact us.
- Eurocode 2
- Structural design of concrete — the design code your engineer works to. We supply to their design.
From the yard, into the field
Slurry kit, in the metal.
Panels, channels and slats — cast on the Chilsworthy casting beds.
Configure your slurry store
Tell us herd size and store dimensions — we will quote it.
Related products
Often ordered alongside.
Sizing tool
How much slurry storage do you need?
Plug in herd size, animal type and storage months — we will translate it into an SSAFO-compliant volume, the WCCP panel system that fits, and a panel-count estimate. All compute is on this page; nothing leaves your browser.
Indicative only. Final design is site-specific to Eurocode 2 with surcharge, freeboard and SSAFO 2018 capacity statement issued in the order pack.
Specification sheets
Download the technical data.
Floating sleeper channel technical data and adjacent slurry-handling references.
Ready to specify it?
Send us herd size, current capacity and a sketch. We will come back with a quote and a lead time.